26.09.2018, 14:14 | #1 |
Profi
Регистрация: 10.03.2011
Адрес: Москва
Сообщений: 706
Репутация: 35
|
Xerox 4112 010-320
|
26.09.2018, 14:17 | #2 |
Местный
Регистрация: 26.07.2017
Адрес: d
Сообщений: 529
Репутация: 7
|
Re: Xerox 4112 010-320
NOTE: To clear this fail, it is necessary to clear DC131[744-156] back to 0 and turn OFF then ON the
power. The following shows the relation between number for display and sensor detecting a high temperature. • 0: Normal • 1: Heat Roll Thermistor 1 • 2: Heat Roll Thermistor 2 • 3: Heat Roll Thermistor 3 Initial Actions • Check that the Heat Roll Thermistor 1 is in proper contact with the Heat Roll. • Check that the appearance of the Heat Roll Thermistor 1 is free from breakage and dirt. • Check if the following are set to higher temperatures each. DC131[744-001](Warm Up Control Temp)(Default: 192) DC131[744-050](Ready Control Temp) (Default:185) DC131[744-052~056](Idling Control Temp) (Default:185) DC131[744-103](Low Power Control Temp) (Default:140) |
|
"Форум индустрии цифровой печати" 2008-2023 Все вопросы по сотрудничеству: Электропочта: info@trade-print.ru Москва, Печатников пер. |