|
|
Регистрация | Пригласить друга | Все альбомы | Файловый архив | Справка | Сообщество | Календарь | Сообщения за день | Поиск |
|
Опции темы |
18.06.2018, 09:05 | #1 |
Местный
Регистрация: 01.03.2014
Адрес: SARATOV64
Сообщений: 548
Репутация: 16
|
калибровка резака идеал 6550 ЕР
|
18.06.2018, 09:50 | #2 |
Местный
Регистрация: 24.08.2016
Адрес: Украина
Сообщений: 1,161
Репутация: 52
|
Re: калибровка резака идеал 6550 ЕР
aza,
Calibrating the backgauge on the Ideal 4850-95EP, 5221-95EP and 6550-95EP versions 1. Press "start" button. The backgauge moves to it's "Set" position. Move backgauge forward until approx. 30 cm(11.820"). Use a pile of paper and make a cut. Measure the paper. 2. Press and hold switch "mm/inch", then press and hold button number "9". Release switch "mm/inch", then release button number "9". The display starts blinking. Insert the correct size, using key pad. 3. Press and hold switch "mm/inch", then press and hold button number "9". Release switch "mm/inch", then release button number "9". The machine is now adjusted electronically to the correct size. 4. Cut paper again and measure it, to confirm that size is correct. Important : Press and hold switch "mm/inch" correctly, otherwise the display changes from metric to inch. |
18.06.2018, 09:52 | #3 |
Местный
Регистрация: 24.08.2016
Адрес: Украина
Сообщений: 1,161
Репутация: 52
|
Re: калибровка резака идеал 6550 ЕР
Мне, вот, больше интересно, реально ли отрегулировать, если нет клавиатуры. У нас врёт на 0.5мм, но без клавы, без понятия как отрегулировать....
Может кто-то подскажет? |
18.06.2018, 10:55 | #4 |
Местный
Регистрация: 01.03.2014
Адрес: SARATOV64
Сообщений: 548
Репутация: 16
|
Re: калибровка резака идеал 6550 ЕР
спасибо большое!
|
|
"Форум индустрии цифровой печати" 2008-2023 Все вопросы по сотрудничеству: Электропочта: info@trade-print.ru Москва, Печатников пер. |