Продам спектрофотометр Eye-one Pro(Москва) - Цифровая печать как бизнес

madforce · 14.06.2011, 13:07

EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD
цена 23 т.р.
Комплектация:
EFI ES-1000 Spectrophotometer (EYE-ONE PRO)
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
электропочта: madforce77@gmail.com

General Information
Date and Time: 13.05.2011 23:48:36
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899868
Firmware version: 505
CPLD version: 999
Dark measurement count: 127
Lamp burning time: 262.149 seconds
Spot measurement count: 54
Scan measurement count: 48

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 13.05.2011 23:48:36
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899868
Firmware version: 505
CPLD version: 999
Dark measurement count: 127
Lamp burning time: 262.149 seconds
Spot measurement count: 54
Scan measurement count: 48

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=120.357 Y=125.958 Z=136.607)
Gray measurement: Successful (X=47.362 Y=49.516 Z=55.338)
Black measurement: Successful (X=0.211 Y=0.191 Z=0.348)
Red measurement: Successful (X=44.023 Y=24.307 Z=1.194)
Green measurement: Successful (X=52.416 Y=92.587 Z=8.126)
Blue measurement: Successful (X=23.712 Y=8.831 Z=127.322)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-197.750)

Noise Measurement
Noise measurement: Pass (3.122)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=263.197 seconds, CIT=0.01095 seconds, LIT=0.0101619 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.672 a=-0.486 b=1.548)
Measurement 2: Successful (L=96.675 a=-0.491 b=1.561)
Measurement 3: Successful (L=96.676 a=-0.492 b=1.553)
Measurement 4: Successful (L=96.690 a=-0.499 b=1.552)
Measurement 5: Successful (L=96.696 a=-0.503 b=1.566)
Measurement 6: Successful (L=96.692 a=-0.499 b=1.565)
Measurement 7: Successful (L=96.695 a=-0.492 b=1.530)
Measurement 8: Successful (L=96.713 a=-0.504 b=1.543)
Measurement 9: Successful (L=96.705 a=-0.503 b=1.552)
Measurement 10: Successful (L=96.712 a=-0.498 b=1.556)
Reflectance drift test: Pass (0.017)

*** PASS ***

Возможна пересылка в другой город

madforce · 27.06.2011, 13:27

Новый EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD
цена 23 т.р.
Комплектация:
EFI ES-1000 Spectrophotometer (EYE-ONE PRO)
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

Selena · 27.06.2011, 14:10

безналом возмете?

madforce · 27.06.2011, 14:16

Цитата:

Сообщение от Selena

безналом возмете?

Ни разу не получал
Как вариант если только на карту

Selena · 27.06.2011, 18:20

реквизиты на оплату в личку пожалуйста

madforce · 04.07.2011, 13:40

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 04.07.2011 12:52:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 301568
Firmware version: 502
CPLD version: 999
Dark measurement count: 5401
Lamp burning time: 10710.3 seconds
Spot measurement count: 1828
Scan measurement count: 858

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 04.07.2011 12:52:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 301568
Firmware version: 502
CPLD version: 999
Dark measurement count: 5401
Lamp burning time: 10710.3 seconds
Spot measurement count: 1828
Scan measurement count: 858

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=108.055 Y=113.537 Z=126.782)
Gray measurement: Successful (X=41.347 Y=43.149 Z=50.177)
Black measurement: Successful (X=0.136 Y=0.137 Z=0.188)
Red measurement: Successful (X=39.167 Y=21.858 Z=1.035)
Green measurement: Successful (X=46.718 Y=83.447 Z=7.842)
Blue measurement: Successful (X=22.108 Y=7.899 Z=118.215)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-190.859)

Noise Measurement
Noise measurement: Pass (2.799)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=10710.9 seconds, CIT=0.01319 seconds, LIT=0.0129405 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.173 a=-0.477 b=2.172)
Measurement 2: Successful (L=96.146 a=-0.472 b=2.198)
Measurement 3: Successful (L=96.137 a=-0.476 b=2.211)
Measurement 4: Successful (L=96.123 a=-0.470 b=2.220)
Measurement 5: Successful (L=96.101 a=-0.468 b=2.254)
Measurement 6: Successful (L=96.102 a=-0.465 b=2.258)
Measurement 7: Successful (L=96.092 a=-0.465 b=2.258)
Measurement 8: Successful (L=96.086 a=-0.468 b=2.280)
Measurement 9: Successful (L=96.073 a=-0.466 b=2.296)
Measurement 10: Successful (L=96.075 a=-0.463 b=2.293)
Reflectance drift test: Pass (0.045)

*** PASS ***

madforce · 09.07.2011, 13:31

X-Rite (No UV-Filter) REVD
цена 23 т.р.
Комплектация:
X-Rite Spectrophotometer
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
электропочта: madforce77@gmail.com

General Information
Date and Time: 09.07.2011 12:44:22
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 332876
Firmware version: 503
CPLD version: 999
Dark measurement count: 7180
Lamp burning time: 15815.7 seconds
Spot measurement count: 2294
Scan measurement count: 4966

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 09.07.2011 12:44:22
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 332876
Firmware version: 503
CPLD version: 999
Dark measurement count: 7180
Lamp burning time: 15815.7 seconds
Spot measurement count: 2294
Scan measurement count: 4966

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=119.384 Y=124.894 Z=140.789)
Gray measurement: Successful (X=49.189 Y=51.376 Z=59.322)
Black measurement: Successful (X=0.252 Y=0.232 Z=0.316)
Red measurement: Successful (X=43.815 Y=24.492 Z=1.243)
Green measurement: Successful (X=51.138 Y=91.806 Z=8.569)
Blue measurement: Successful (X=24.628 Y=8.667 Z=131.216)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-186.508)

Noise Measurement
Noise measurement: Pass (3.040)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=15816.3 seconds, CIT=0.01204 seconds, LIT=0.0126144 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.551 a=-0.353 b=2.446)
Measurement 2: Successful (L=95.518 a=-0.354 b=2.475)
Measurement 3: Successful (L=95.501 a=-0.343 b=2.474)
Measurement 4: Successful (L=95.475 a=-0.341 b=2.500)
Measurement 5: Successful (L=95.472 a=-0.337 b=2.498)
Measurement 6: Successful (L=95.459 a=-0.345 b=2.519)
Measurement 7: Successful (L=95.449 a=-0.349 b=2.538)
Measurement 8: Successful (L=95.453 a=-0.336 b=2.522)
Measurement 9: Successful (L=95.436 a=-0.335 b=2.544)
Measurement 10: Successful (L=95.438 a=-0.340 b=2.546)
Reflectance drift test: Pass (0.041)

*** PASS ***

madforce · 11.07.2011, 16:29

EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD новый
цена 23 т.р.
Комплектация:
EFI ES-1000 Spectrophotometer (EYE-ONE PRO)
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 11.07.2011 15:43:15
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 887359
Firmware version: 503
CPLD version: 999
Dark measurement count: 13
Lamp burning time: 49.0972 seconds
Spot measurement count: 4
Scan measurement count: 9

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 11.07.2011 15:43:15
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 887359
Firmware version: 503
CPLD version: 999
Dark measurement count: 13
Lamp burning time: 49.0972 seconds
Spot measurement count: 4
Scan measurement count: 9

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=115.614 Y=122.198 Z=131.461)
Gray measurement: Successful (X=43.266 Y=45.493 Z=51.144)
Black measurement: Successful (X=0.122 Y=0.112 Z=0.212)
Red measurement: Successful (X=41.883 Y=23.144 Z=1.010)
Green measurement: Successful (X=50.888 Y=90.157 Z=8.125)
Blue measurement: Successful (X=22.509 Y=8.592 Z=121.640)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-189.992)

Noise Measurement
Noise measurement: Pass (3.266)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=50.157 seconds, CIT=0.01142 seconds, LIT=0.0116929 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.487 a=-0.256 b=2.539)
Measurement 2: Successful (L=95.470 a=-0.254 b=2.528)
Measurement 3: Successful (L=95.464 a=-0.280 b=2.588)
Measurement 4: Successful (L=95.462 a=-0.267 b=2.548)
Measurement 5: Successful (L=95.456 a=-0.276 b=2.584)
Measurement 6: Successful (L=95.470 a=-0.287 b=2.586)
Measurement 7: Successful (L=95.452 a=-0.293 b=2.620)
Measurement 8: Successful (L=95.459 a=-0.308 b=2.640)
Measurement 9: Successful (L=95.467 a=-0.303 b=2.603)
Measurement 10: Successful (L=95.452 a=-0.290 b=2.591)
Reflectance drift test: Pass (0.033)

*** PASS ***

madforce · 26.07.2011, 23:31

X-Rite Eye-One Pro (No Filter) REVB БУ
цена 18 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 22.07.2011 11:41:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 122624
Firmware version: 302
CPLD version: 301
Dark measurement count: 5010
Lamp burning time: 10424.5 seconds
Spot measurement count: 3954
Scan measurement count: 924

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is not working or was not pressed
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 22.07.2011 11:41:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 122624
Firmware version: 302
CPLD version: 301
Dark measurement count: 5010
Lamp burning time: 10424.5 seconds
Spot measurement count: 3954
Scan measurement count: 924

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is not working or was not pressed
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=101.888 Y=106.787 Z=115.253)
Gray measurement: Successful (X=39.447 Y=41.285 Z=46.048)
Black measurement: Successful (X=0.151 Y=0.159 Z=0.269)
Red measurement: Successful (X=37.017 Y=20.433 Z=0.960)
Green measurement: Successful (X=44.686 Y=78.824 Z=7.079)
Blue measurement: Successful (X=20.199 Y=7.554 Z=107.526)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-30.133)

Noise Measurement
Noise measurement: Pass (2.992)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=10425.1 seconds, CIT=0.02217 seconds, LIT=0.0252431 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.893 a=-0.488 b=1.696)
Measurement 2: Successful (L=95.858 a=-0.482 b=1.741)
Measurement 3: Successful (L=95.825 a=-0.487 b=1.822)
Measurement 4: Successful (L=95.789 a=-0.472 b=1.862)
Measurement 5: Successful (L=95.781 a=-0.463 b=1.886)
Measurement 6: Successful (L=95.772 a=-0.463 b=1.902)
Measurement 7: Successful (L=95.764 a=-0.462 b=1.915)
Measurement 8: Successful (L=95.761 a=-0.460 b=1.921)
Measurement 9: Successful (L=95.738 a=-0.438 b=1.958)
Measurement 10: Successful (L=95.743 a=-0.450 b=1.960)
Reflectance drift test: Pass (0.081)

*** PASS ***

madforce · 27.07.2011, 22:56

Новый EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD
цена 23 т.р.
Комплектация:
EFI ES-1000 Spectrophotometer (EYE-ONE PRO)
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 27.07.2011 22:07:37
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 890635
Firmware version: 503
CPLD version: 999
Dark measurement count: 0
Lamp burning time: 0 seconds
Spot measurement count: 0
Scan measurement count: 0

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 27.07.2011 22:07:37
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 890635
Firmware version: 503
CPLD version: 999
Dark measurement count: 0
Lamp burning time: 0 seconds
Spot measurement count: 0
Scan measurement count: 0

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=116.579 Y=123.014 Z=134.616)
Gray measurement: Successful (X=43.761 Y=45.863 Z=52.137)
Black measurement: Successful (X=0.052 Y=0.037 Z=0.177)
Red measurement: Successful (X=42.682 Y=23.710 Z=1.106)
Green measurement: Successful (X=50.491 Y=90.508 Z=8.366)
Blue measurement: Successful (X=23.151 Y=8.442 Z=124.839)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-185.703)

Noise Measurement
Noise measurement: Pass (3.001)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=1.06301 seconds, CIT=0.01231 seconds, LIT=0.0127631 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.679 a=-0.295 b=2.454)
Measurement 2: Successful (L=95.649 a=-0.292 b=2.452)
Measurement 3: Successful (L=95.645 a=-0.298 b=2.449)
Measurement 4: Successful (L=95.625 a=-0.287 b=2.435)
Measurement 5: Successful (L=95.628 a=-0.298 b=2.449)
Measurement 6: Successful (L=95.605 a=-0.288 b=2.457)
Measurement 7: Successful (L=95.612 a=-0.284 b=2.428)
Measurement 8: Successful (L=95.618 a=-0.288 b=2.423)
Measurement 9: Successful (L=95.609 a=-0.289 b=2.441)
Measurement 10: Successful (L=95.609 a=-0.290 b=2.443)
Reflectance drift test: Pass (0.023)

*** PASS ***

Metr · 27.07.2011, 23:59

и я продам 19,5 тыс руб с кучей прибамбасов без UF фильтра
Извините но мои сообщения не проходят

madforce · 28.07.2011, 00:47

лог прибора можно увидеть?

madforce · 28.07.2011, 14:35

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 28.07.2011 13:51:10
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 311309
Firmware version: 503
CPLD version: 999
Dark measurement count: 3345
Lamp burning time: 150.98 seconds
Spot measurement count: 99
Scan measurement count: 11

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 28.07.2011 13:51:10
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 311309
Firmware version: 503
CPLD version: 999
Dark measurement count: 3345
Lamp burning time: 150.98 seconds
Spot measurement count: 99
Scan measurement count: 11

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=110.190 Y=116.433 Z=126.960)
Gray measurement: Successful (X=39.032 Y=41.005 Z=46.784)
Black measurement: Successful (X=0.057 Y=0.048 Z=0.204)
Red measurement: Successful (X=39.764 Y=22.027 Z=1.096)
Green measurement: Successful (X=48.291 Y=86.285 Z=8.058)
Blue measurement: Successful (X=22.095 Y=8.091 Z=118.032)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-200.367)

Noise Measurement
Noise measurement: Pass (3.118)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=151.62 seconds, CIT=0.01278 seconds, LIT=0.0133706 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.738 a=-0.459 b=2.550)
Measurement 2: Successful (L=95.726 a=-0.450 b=2.550)
Measurement 3: Successful (L=95.705 a=-0.453 b=2.570)
Measurement 4: Successful (L=95.700 a=-0.454 b=2.567)
Measurement 5: Successful (L=95.691 a=-0.450 b=2.572)
Measurement 6: Successful (L=95.683 a=-0.452 b=2.588)
Measurement 7: Successful (L=95.694 a=-0.450 b=2.586)
Measurement 8: Successful (L=95.680 a=-0.454 b=2.595)
Measurement 9: Successful (L=95.676 a=-0.447 b=2.602)
Measurement 10: Successful (L=95.683 a=-0.450 b=2.595)
Reflectance drift test: Pass (0.023)

*** PASS ***

Metr · 28.07.2011, 23:44

General Information
Date and Time: 29.06.2011 14:40:02
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows ???,

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 111217
Firmware version: 202
CPLD version: 2
Dark measurement count: 4574
Lamp burning time: 11586 seconds
Spot measurement count: 2191
Scan measurement count: 769

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Not successful

*** FAIL ***

madforce · 02.08.2011, 12:23

Продаю Eye-One Pro (No Filter)
Комплект поставки:
Спектрофотометр Eye-One Pro
Eye-One Scan Target 1.4
LCD monitor holder
Positioning target
New Scanning ruler, backup board and softcase
Calibration plate
USB-кабель
Цена 23 т.р.
прибор в фабричной упаковке
Дата изготовления: 01.2011

Metr · 19.08.2011, 17:31

и я продам 17,5 тыс руб с кучей насадок без фильтра UF
General Information
Date and Time: 19.08.2011 16:46:56
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows ???, Service Pack 1

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 111217
Firmware version: 202
CPLD version: 2
Dark measurement count: 4609
Lamp burning time: 11587.3 seconds
Spot measurement count: 2197
Scan measurement count: 769

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful

*** FAIL ***
нал безнал- отправлю в любой город.
Дмитрий 7-928-321-4041

madforce · 29.08.2011, 21:35

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 29.08.2011 20:44:47
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899141
Firmware version: 505
CPLD version: 999
Dark measurement count: 0
Lamp burning time: 0 seconds
Spot measurement count: 0
Scan measurement count: 0

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 29.08.2011 20:44:47
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899141
Firmware version: 505
CPLD version: 999
Dark measurement count: 0
Lamp burning time: 0 seconds
Spot measurement count: 0
Scan measurement count: 0

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=138.771 Y=144.960 Z=125.277)
Gray measurement: Successful (X=57.730 Y=59.592 Z=51.919)
Black measurement: Successful (X=0.106 Y=0.108 Z=0.240)
Red measurement: Successful (X=59.706 Y=32.921 Z=1.469)
Green measurement: Successful (X=57.332 Y=103.401 Z=10.164)
Blue measurement: Successful (X=20.723 Y=7.184 Z=111.579)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-190.250)

Noise Measurement
Noise measurement: Pass (3.144)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=1.07214 seconds, CIT=0.01462 seconds, LIT=0.0158094 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.718 a=-0.411 b=2.128)
Measurement 2: Successful (L=95.693 a=-0.403 b=2.122)
Measurement 3: Successful (L=95.710 a=-0.424 b=2.140)
Measurement 4: Successful (L=95.677 a=-0.408 b=2.133)
Measurement 5: Successful (L=95.689 a=-0.422 b=2.131)
Measurement 6: Successful (L=95.684 a=-0.431 b=2.177)
Measurement 7: Successful (L=95.703 a=-0.428 b=2.133)
Measurement 8: Successful (L=95.695 a=-0.435 b=2.175)
Measurement 9: Successful (L=95.695 a=-0.439 b=2.176)
Measurement 10: Successful (L=95.688 a=-0.427 b=2.151)
Reflectance drift test: Pass (0.025)

*** PASS ***

madforce · 29.08.2011, 21:37

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 29.08.2011 20:37:29
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 328851
Firmware version: 503
CPLD version: 999
Dark measurement count: 83
Lamp burning time: 88.6901 seconds
Spot measurement count: 75
Scan measurement count: 1

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass

*** PASS ***

**************************

General Information
Date and Time: 29.08.2011 20:37:29
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 328851
Firmware version: 503
CPLD version: 999
Dark measurement count: 83
Lamp burning time: 88.6901 seconds
Spot measurement count: 75
Scan measurement count: 1

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=140.348 Y=146.016 Z=130.033)
Gray measurement: Successful (X=59.878 Y=61.696 Z=55.132)
Black measurement: Successful (X=0.177 Y=0.174 Z=0.320)
Red measurement: Successful (X=59.221 Y=32.692 Z=1.601)
Green measurement: Successful (X=58.378 Y=104.591 Z=10.322)
Blue measurement: Successful (X=21.483 Y=7.381 Z=115.693)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-185.219)

Noise Measurement
Noise measurement: Pass (3.154)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=89.3257 seconds, CIT=0.01197 seconds, LIT=0.0118541 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.717 a=-0.275 b=2.441)
Measurement 2: Successful (L=95.695 a=-0.276 b=2.465)
Measurement 3: Successful (L=95.695 a=-0.267 b=2.438)
Measurement 4: Successful (L=95.667 a=-0.275 b=2.478)
Measurement 5: Successful (L=95.679 a=-0.283 b=2.470)
Measurement 6: Successful (L=95.679 a=-0.296 b=2.498)
Measurement 7: Successful (L=95.667 a=-0.298 b=2.515)
Measurement 8: Successful (L=95.685 a=-0.302 b=2.500)
Measurement 9: Successful (L=95.686 a=-0.313 b=2.508)
Measurement 10: Successful (L=95.695 a=-0.315 b=2.504)
Reflectance drift test: Pass (0.032)

*** PASS ***

maxivillus · 30.08.2011, 07:23

А лампы, которые меняли в этих спектрофотометрах сколько протянут?

madforce · 30.08.2011, 09:08

Откуда у вас такая уверенность что в них меняли лампы?
По разному, могут и до 200,000 сек. прогореть.

14.06.2011, 13:07	#1
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	Продам спектрофотометр Eye-one Pro(Москва) EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD цена 23 т.р. Комплектация: EFI ES-1000 Spectrophotometer (EYE-ONE PRO) Calibration cradle Patch quide USB cable Strip quide Flat panel holder электропочта: madforce77@gmail.com General Information Date and Time: 13.05.2011 23:48:36 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 899868 Firmware version: 505 CPLD version: 999 Dark measurement count: 127 Lamp burning time: 262.149 seconds Spot measurement count: 54 Scan measurement count: 48 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 13.05.2011 23:48:36 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 899868 Firmware version: 505 CPLD version: 999 Dark measurement count: 127 Lamp burning time: 262.149 seconds Spot measurement count: 54 Scan measurement count: 48 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=120.357 Y=125.958 Z=136.607) Gray measurement: Successful (X=47.362 Y=49.516 Z=55.338) Black measurement: Successful (X=0.211 Y=0.191 Z=0.348) Red measurement: Successful (X=44.023 Y=24.307 Z=1.194) Green measurement: Successful (X=52.416 Y=92.587 Z=8.126) Blue measurement: Successful (X=23.712 Y=8.831 Z=127.322) Emission Test: Pass Dark measurement Dark measurement: Pass (-197.750) Noise Measurement Noise measurement: Pass (3.122) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=263.197 seconds, CIT=0.01095 seconds, LIT=0.0101619 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=96.672 a=-0.486 b=1.548) Measurement 2: Successful (L=96.675 a=-0.491 b=1.561) Measurement 3: Successful (L=96.676 a=-0.492 b=1.553) Measurement 4: Successful (L=96.690 a=-0.499 b=1.552) Measurement 5: Successful (L=96.696 a=-0.503 b=1.566) Measurement 6: Successful (L=96.692 a=-0.499 b=1.565) Measurement 7: Successful (L=96.695 a=-0.492 b=1.530) Measurement 8: Successful (L=96.713 a=-0.504 b=1.543) Measurement 9: Successful (L=96.705 a=-0.503 b=1.552) Measurement 10: Successful (L=96.712 a=-0.498 b=1.556) Reflectance drift test: Pass (0.017) * PASS *** Возможна пересылка в другой город

27.06.2011, 13:27	#2
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	Новый EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD цена 23 т.р. Комплектация: EFI ES-1000 Spectrophotometer (EYE-ONE PRO) Calibration cradle Patch quide USB cable Strip quide Flat panel holder

27.06.2011, 14:10	#3
Selena Местный Регистрация: 12.10.2010 Адрес: Guangzhou Сообщений: 3,075 Репутация: 73	безналом возмете?

27.06.2011, 18:20	#5
Selena Местный Регистрация: 12.10.2010 Адрес: Guangzhou Сообщений: 3,075 Репутация: 73	реквизиты на оплату в личку пожалуйста

04.07.2011, 13:40	#6
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	X-Rite Eye-One Pro (No Filter) REVD цена 23 т.р. Комплектация: Eye-One Pro Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 04.07.2011 12:52:26 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 301568 Firmware version: 502 CPLD version: 999 Dark measurement count: 5401 Lamp burning time: 10710.3 seconds Spot measurement count: 1828 Scan measurement count: 858 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is licensed Module "Printer Easy CMYK" is licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 04.07.2011 12:52:26 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 301568 Firmware version: 502 CPLD version: 999 Dark measurement count: 5401 Lamp burning time: 10710.3 seconds Spot measurement count: 1828 Scan measurement count: 858 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is licensed Module "Printer Easy CMYK" is licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=108.055 Y=113.537 Z=126.782) Gray measurement: Successful (X=41.347 Y=43.149 Z=50.177) Black measurement: Successful (X=0.136 Y=0.137 Z=0.188) Red measurement: Successful (X=39.167 Y=21.858 Z=1.035) Green measurement: Successful (X=46.718 Y=83.447 Z=7.842) Blue measurement: Successful (X=22.108 Y=7.899 Z=118.215) Emission Test: Pass Dark measurement Dark measurement: Pass (-190.859) Noise Measurement Noise measurement: Pass (2.799) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=10710.9 seconds, CIT=0.01319 seconds, LIT=0.0129405 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=96.173 a=-0.477 b=2.172) Measurement 2: Successful (L=96.146 a=-0.472 b=2.198) Measurement 3: Successful (L=96.137 a=-0.476 b=2.211) Measurement 4: Successful (L=96.123 a=-0.470 b=2.220) Measurement 5: Successful (L=96.101 a=-0.468 b=2.254) Measurement 6: Successful (L=96.102 a=-0.465 b=2.258) Measurement 7: Successful (L=96.092 a=-0.465 b=2.258) Measurement 8: Successful (L=96.086 a=-0.468 b=2.280) Measurement 9: Successful (L=96.073 a=-0.466 b=2.296) Measurement 10: Successful (L=96.075 a=-0.463 b=2.293) Reflectance drift test: Pass (0.045) * PASS ***

09.07.2011, 13:31	#7
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	X-Rite (No UV-Filter) REVD цена 23 т.р. Комплектация: X-Rite Spectrophotometer Calibration cradle Patch quide USB cable Strip quide Flat panel holder электропочта: madforce77@gmail.com General Information Date and Time: 09.07.2011 12:44:22 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 332876 Firmware version: 503 CPLD version: 999 Dark measurement count: 7180 Lamp burning time: 15815.7 seconds Spot measurement count: 2294 Scan measurement count: 4966 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 09.07.2011 12:44:22 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 332876 Firmware version: 503 CPLD version: 999 Dark measurement count: 7180 Lamp burning time: 15815.7 seconds Spot measurement count: 2294 Scan measurement count: 4966 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=119.384 Y=124.894 Z=140.789) Gray measurement: Successful (X=49.189 Y=51.376 Z=59.322) Black measurement: Successful (X=0.252 Y=0.232 Z=0.316) Red measurement: Successful (X=43.815 Y=24.492 Z=1.243) Green measurement: Successful (X=51.138 Y=91.806 Z=8.569) Blue measurement: Successful (X=24.628 Y=8.667 Z=131.216) Emission Test: Pass Dark measurement Dark measurement: Pass (-186.508) Noise Measurement Noise measurement: Pass (3.040) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=15816.3 seconds, CIT=0.01204 seconds, LIT=0.0126144 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.551 a=-0.353 b=2.446) Measurement 2: Successful (L=95.518 a=-0.354 b=2.475) Measurement 3: Successful (L=95.501 a=-0.343 b=2.474) Measurement 4: Successful (L=95.475 a=-0.341 b=2.500) Measurement 5: Successful (L=95.472 a=-0.337 b=2.498) Measurement 6: Successful (L=95.459 a=-0.345 b=2.519) Measurement 7: Successful (L=95.449 a=-0.349 b=2.538) Measurement 8: Successful (L=95.453 a=-0.336 b=2.522) Measurement 9: Successful (L=95.436 a=-0.335 b=2.544) Measurement 10: Successful (L=95.438 a=-0.340 b=2.546) Reflectance drift test: Pass (0.041) * PASS ***

11.07.2011, 16:29	#8
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD новый цена 23 т.р. Комплектация: EFI ES-1000 Spectrophotometer (EYE-ONE PRO) Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 11.07.2011 15:43:15 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 887359 Firmware version: 503 CPLD version: 999 Dark measurement count: 13 Lamp burning time: 49.0972 seconds Spot measurement count: 4 Scan measurement count: 9 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 11.07.2011 15:43:15 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 887359 Firmware version: 503 CPLD version: 999 Dark measurement count: 13 Lamp burning time: 49.0972 seconds Spot measurement count: 4 Scan measurement count: 9 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=115.614 Y=122.198 Z=131.461) Gray measurement: Successful (X=43.266 Y=45.493 Z=51.144) Black measurement: Successful (X=0.122 Y=0.112 Z=0.212) Red measurement: Successful (X=41.883 Y=23.144 Z=1.010) Green measurement: Successful (X=50.888 Y=90.157 Z=8.125) Blue measurement: Successful (X=22.509 Y=8.592 Z=121.640) Emission Test: Pass Dark measurement Dark measurement: Pass (-189.992) Noise Measurement Noise measurement: Pass (3.266) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=50.157 seconds, CIT=0.01142 seconds, LIT=0.0116929 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.487 a=-0.256 b=2.539) Measurement 2: Successful (L=95.470 a=-0.254 b=2.528) Measurement 3: Successful (L=95.464 a=-0.280 b=2.588) Measurement 4: Successful (L=95.462 a=-0.267 b=2.548) Measurement 5: Successful (L=95.456 a=-0.276 b=2.584) Measurement 6: Successful (L=95.470 a=-0.287 b=2.586) Measurement 7: Successful (L=95.452 a=-0.293 b=2.620) Measurement 8: Successful (L=95.459 a=-0.308 b=2.640) Measurement 9: Successful (L=95.467 a=-0.303 b=2.603) Measurement 10: Successful (L=95.452 a=-0.290 b=2.591) Reflectance drift test: Pass (0.033) * PASS ***

26.07.2011, 23:31	#9
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	X-Rite Eye-One Pro (No Filter) REVB БУ цена 18 т.р. Комплектация: Eye-One Pro Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 22.07.2011 11:41:26 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 122624 Firmware version: 302 CPLD version: 301 Dark measurement count: 5010 Lamp burning time: 10424.5 seconds Spot measurement count: 3954 Scan measurement count: 924 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is licensed Module "Printer Easy CMYK" is licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is not working or was not pressed Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 22.07.2011 11:41:26 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 122624 Firmware version: 302 CPLD version: 301 Dark measurement count: 5010 Lamp burning time: 10424.5 seconds Spot measurement count: 3954 Scan measurement count: 924 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is licensed Module "Printer Easy CMYK" is licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is not working or was not pressed Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=101.888 Y=106.787 Z=115.253) Gray measurement: Successful (X=39.447 Y=41.285 Z=46.048) Black measurement: Successful (X=0.151 Y=0.159 Z=0.269) Red measurement: Successful (X=37.017 Y=20.433 Z=0.960) Green measurement: Successful (X=44.686 Y=78.824 Z=7.079) Blue measurement: Successful (X=20.199 Y=7.554 Z=107.526) Emission Test: Pass Dark measurement Dark measurement: Pass (-30.133) Noise Measurement Noise measurement: Pass (2.992) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=10425.1 seconds, CIT=0.02217 seconds, LIT=0.0252431 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.893 a=-0.488 b=1.696) Measurement 2: Successful (L=95.858 a=-0.482 b=1.741) Measurement 3: Successful (L=95.825 a=-0.487 b=1.822) Measurement 4: Successful (L=95.789 a=-0.472 b=1.862) Measurement 5: Successful (L=95.781 a=-0.463 b=1.886) Measurement 6: Successful (L=95.772 a=-0.463 b=1.902) Measurement 7: Successful (L=95.764 a=-0.462 b=1.915) Measurement 8: Successful (L=95.761 a=-0.460 b=1.921) Measurement 9: Successful (L=95.738 a=-0.438 b=1.958) Measurement 10: Successful (L=95.743 a=-0.450 b=1.960) Reflectance drift test: Pass (0.081) * PASS ***

27.07.2011, 22:56	#10
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	Новый EFI ES-1000 (GretagMacbetch/X-Rite) UV-Cut REVD цена 23 т.р. Комплектация: EFI ES-1000 Spectrophotometer (EYE-ONE PRO) Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 27.07.2011 22:07:37 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 890635 Firmware version: 503 CPLD version: 999 Dark measurement count: 0 Lamp burning time: 0 seconds Spot measurement count: 0 Scan measurement count: 0 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 27.07.2011 22:07:37 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 890635 Firmware version: 503 CPLD version: 999 Dark measurement count: 0 Lamp burning time: 0 seconds Spot measurement count: 0 Scan measurement count: 0 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=116.579 Y=123.014 Z=134.616) Gray measurement: Successful (X=43.761 Y=45.863 Z=52.137) Black measurement: Successful (X=0.052 Y=0.037 Z=0.177) Red measurement: Successful (X=42.682 Y=23.710 Z=1.106) Green measurement: Successful (X=50.491 Y=90.508 Z=8.366) Blue measurement: Successful (X=23.151 Y=8.442 Z=124.839) Emission Test: Pass Dark measurement Dark measurement: Pass (-185.703) Noise Measurement Noise measurement: Pass (3.001) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=1.06301 seconds, CIT=0.01231 seconds, LIT=0.0127631 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.679 a=-0.295 b=2.454) Measurement 2: Successful (L=95.649 a=-0.292 b=2.452) Measurement 3: Successful (L=95.645 a=-0.298 b=2.449) Measurement 4: Successful (L=95.625 a=-0.287 b=2.435) Measurement 5: Successful (L=95.628 a=-0.298 b=2.449) Measurement 6: Successful (L=95.605 a=-0.288 b=2.457) Measurement 7: Successful (L=95.612 a=-0.284 b=2.428) Measurement 8: Successful (L=95.618 a=-0.288 b=2.423) Measurement 9: Successful (L=95.609 a=-0.289 b=2.441) Measurement 10: Successful (L=95.609 a=-0.290 b=2.443) Reflectance drift test: Pass (0.023) * PASS ***

27.07.2011, 23:59	#11
Metr Местный Регистрация: 04.08.2008 Адрес: Ставрополь Сообщений: 836 Репутация: 42	и я продам 19,5 тыс руб с кучей прибамбасов без UF фильтра Извините но мои сообщения не проходят

28.07.2011, 00:47	#12
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	лог прибора можно увидеть?

28.07.2011, 14:35	#13
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	X-Rite Eye-One Pro (No Filter) REVD цена 23 т.р. Комплектация: Eye-One Pro Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 28.07.2011 13:51:10 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 311309 Firmware version: 503 CPLD version: 999 Dark measurement count: 3345 Lamp burning time: 150.98 seconds Spot measurement count: 99 Scan measurement count: 11 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is licensed Module "Printer Easy CMYK" is licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 28.07.2011 13:51:10 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 311309 Firmware version: 503 CPLD version: 999 Dark measurement count: 3345 Lamp burning time: 150.98 seconds Spot measurement count: 99 Scan measurement count: 11 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is licensed Module "Printer Easy CMYK" is licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=110.190 Y=116.433 Z=126.960) Gray measurement: Successful (X=39.032 Y=41.005 Z=46.784) Black measurement: Successful (X=0.057 Y=0.048 Z=0.204) Red measurement: Successful (X=39.764 Y=22.027 Z=1.096) Green measurement: Successful (X=48.291 Y=86.285 Z=8.058) Blue measurement: Successful (X=22.095 Y=8.091 Z=118.032) Emission Test: Pass Dark measurement Dark measurement: Pass (-200.367) Noise Measurement Noise measurement: Pass (3.118) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=151.62 seconds, CIT=0.01278 seconds, LIT=0.0133706 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.738 a=-0.459 b=2.550) Measurement 2: Successful (L=95.726 a=-0.450 b=2.550) Measurement 3: Successful (L=95.705 a=-0.453 b=2.570) Measurement 4: Successful (L=95.700 a=-0.454 b=2.567) Measurement 5: Successful (L=95.691 a=-0.450 b=2.572) Measurement 6: Successful (L=95.683 a=-0.452 b=2.588) Measurement 7: Successful (L=95.694 a=-0.450 b=2.586) Measurement 8: Successful (L=95.680 a=-0.454 b=2.595) Measurement 9: Successful (L=95.676 a=-0.447 b=2.602) Measurement 10: Successful (L=95.683 a=-0.450 b=2.595) Reflectance drift test: Pass (0.023) * PASS ***

28.07.2011, 23:44	#14
Metr Местный Регистрация: 04.08.2008 Адрес: Ставрополь Сообщений: 836 Репутация: 42	General Information Date and Time: 29.06.2011 14:40:02 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows ???, Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 111217 Firmware version: 202 CPLD version: 2 Dark measurement count: 4574 Lamp burning time: 11586 seconds Spot measurement count: 2191 Scan measurement count: 769 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Not successful * FAIL *

02.08.2011, 12:23	#15
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	Продаю Eye-One Pro (No Filter) Комплект поставки: Спектрофотометр Eye-One Pro Eye-One Scan Target 1.4 LCD monitor holder Positioning target New Scanning ruler, backup board and softcase Calibration plate USB-кабель Цена 23 т.р. прибор в фабричной упаковке Дата изготовления: 01.2011

19.08.2011, 17:31	#16
Metr Местный Регистрация: 04.08.2008 Адрес: Ставрополь Сообщений: 836 Репутация: 42	и я продам 17,5 тыс руб с кучей насадок без фильтра UF General Information Date and Time: 19.08.2011 16:46:56 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows ???, Service Pack 1 Device Information Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ] Serial number: 111217 Firmware version: 202 CPLD version: 2 Dark measurement count: 4609 Lamp burning time: 11587.3 seconds Spot measurement count: 2197 Scan measurement count: 769 Dongle Test Module "Scanner" is not licensed Module "Monitor" is licensed Module "Printer" is not licensed Module "Printer RGB only" is licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful * FAIL * нал безнал- отправлю в любой город. Дмитрий 7-928-321-4041

29.08.2011, 21:35	#17
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	X-Rite Eye-One Pro (No Filter) REVD цена 23 т.р. Комплектация: Eye-One Pro Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 29.08.2011 20:44:47 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 899141 Firmware version: 505 CPLD version: 999 Dark measurement count: 0 Lamp burning time: 0 seconds Spot measurement count: 0 Scan measurement count: 0 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 29.08.2011 20:44:47 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ] Serial number: 899141 Firmware version: 505 CPLD version: 999 Dark measurement count: 0 Lamp burning time: 0 seconds Spot measurement count: 0 Scan measurement count: 0 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=138.771 Y=144.960 Z=125.277) Gray measurement: Successful (X=57.730 Y=59.592 Z=51.919) Black measurement: Successful (X=0.106 Y=0.108 Z=0.240) Red measurement: Successful (X=59.706 Y=32.921 Z=1.469) Green measurement: Successful (X=57.332 Y=103.401 Z=10.164) Blue measurement: Successful (X=20.723 Y=7.184 Z=111.579) Emission Test: Pass Dark measurement Dark measurement: Pass (-190.250) Noise Measurement Noise measurement: Pass (3.144) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=1.07214 seconds, CIT=0.01462 seconds, LIT=0.0158094 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.718 a=-0.411 b=2.128) Measurement 2: Successful (L=95.693 a=-0.403 b=2.122) Measurement 3: Successful (L=95.710 a=-0.424 b=2.140) Measurement 4: Successful (L=95.677 a=-0.408 b=2.133) Measurement 5: Successful (L=95.689 a=-0.422 b=2.131) Measurement 6: Successful (L=95.684 a=-0.431 b=2.177) Measurement 7: Successful (L=95.703 a=-0.428 b=2.133) Measurement 8: Successful (L=95.695 a=-0.435 b=2.175) Measurement 9: Successful (L=95.695 a=-0.439 b=2.176) Measurement 10: Successful (L=95.688 a=-0.427 b=2.151) Reflectance drift test: Pass (0.025) * PASS ***

29.08.2011, 21:37	#18
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	X-Rite Eye-One Pro (No Filter) REVD цена 23 т.р. Комплектация: Eye-One Pro Calibration cradle Patch quide USB cable Strip quide Flat panel holder General Information Date and Time: 29.08.2011 20:37:29 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Emission Reflectance Reflectance Scan ] Serial number: 328851 Firmware version: 503 CPLD version: 999 Dark measurement count: 83 Lamp burning time: 88.6901 seconds Spot measurement count: 75 Scan measurement count: 1 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful Gray measurement: Successful Black measurement: Successful Red measurement: Successful Green measurement: Successful Blue measurement: Successful Emission Test: Pass Dark measurement Dark measurement: Pass Noise Measurement Noise measurement: Pass Lamp test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful Measurement 2: Successful Measurement 3: Successful Measurement 4: Successful Measurement 5: Successful Measurement 6: Successful Measurement 7: Successful Measurement 8: Successful Measurement 9: Successful Measurement 10: Successful Reflectance drift test: Pass * PASS * ************************ General Information Date and Time: 29.08.2011 20:37:29 Application version: Version 2.5.1 SDK version i1: Version 3.4.0 Build 131 SDK version iO: Version 1.1.2 Build 100 SDK version iSis: Version 1.0.6 Build 72 Platform: Microsoft Windows XP Professional, Service Pack 3 Device Information Device type: i1Pro (NO filter) [ Emission Reflectance Reflectance Scan ] Serial number: 328851 Firmware version: 503 CPLD version: 999 Dark measurement count: 83 Lamp burning time: 88.6901 seconds Spot measurement count: 75 Scan measurement count: 1 Dongle Test Module "Scanner" is not licensed Module "Monitor" is not licensed Module "Printer" is not licensed Module "Printer RGB only" is not licensed Module "Printer CMYK only" is not licensed Module "Beamer" is not licensed Module "Printer Easy RGB" is not licensed Module "Printer Easy CMYK" is not licensed Module "Digicam" is not licensed Module "Editor" is not licensed Button Test Button is working normally Calibration Emission calibration: Successful Emission Test White measurement: Successful (X=140.348 Y=146.016 Z=130.033) Gray measurement: Successful (X=59.878 Y=61.696 Z=55.132) Black measurement: Successful (X=0.177 Y=0.174 Z=0.320) Red measurement: Successful (X=59.221 Y=32.692 Z=1.601) Green measurement: Successful (X=58.378 Y=104.591 Z=10.322) Blue measurement: Successful (X=21.483 Y=7.381 Z=115.693) Emission Test: Pass Dark measurement Dark measurement: Pass (-185.219) Noise Measurement Noise measurement: Pass (3.154) Lamp Test Reflectance calibration: Successful Reflectance measurement: Successful Check measurement result: Successful Reflectance Test Reflectance calibration: Successful Reflectance spot test: Successful (LOT=89.3257 seconds, CIT=0.01197 seconds, LIT=0.0118541 seconds) Scanning calibration: Successful Reflectance scan test: Successful Measurement 1: Successful (L=95.717 a=-0.275 b=2.441) Measurement 2: Successful (L=95.695 a=-0.276 b=2.465) Measurement 3: Successful (L=95.695 a=-0.267 b=2.438) Measurement 4: Successful (L=95.667 a=-0.275 b=2.478) Measurement 5: Successful (L=95.679 a=-0.283 b=2.470) Measurement 6: Successful (L=95.679 a=-0.296 b=2.498) Measurement 7: Successful (L=95.667 a=-0.298 b=2.515) Measurement 8: Successful (L=95.685 a=-0.302 b=2.500) Measurement 9: Successful (L=95.686 a=-0.313 b=2.508) Measurement 10: Successful (L=95.695 a=-0.315 b=2.504) Reflectance drift test: Pass (0.032) * PASS ***

30.08.2011, 07:23	#19
maxivillus Местный Регистрация: 15.02.2009 Адрес: Badalona Сообщений: 1,599 Репутация: 75	А лампы, которые меняли в этих спектрофотометрах сколько протянут?

30.08.2011, 09:08	#20
madforce Пользователь Регистрация: 14.06.2011 Адрес: Москва Сообщений: 97 Репутация: 1	Откуда у вас такая уверенность что в них меняли лампы? По разному, могут и до 200,000 сек. прогореть.