калибровка тачскрина

[Дмитрий Казахстан]

как откалибровать на xerox dc250

[akaDaddy]

Step 1: Switch the machine off.

Step 2: Press and hold buttons 0 (Zero) 1 and 3, then turn the machine on.

Step 3: You will then be presented with a screen displaying horizontal and vertical lines, these are numbered from P1 to P9.

Step 4: Using the touch pen, touch the points where the lines meet in order, so start withy P1, then P2 and so on. When you have touched the P9 point you should see a message saying "Point Number 9 Save Success".

Step 5: When the above is complete, you will be presented with another matrix. Touch these points randomly and a black box will be displayed where you have just touched. You should also hear an audible tone to confirm this is done each time. If you don;t see any confirmation that your touch worked, just try again.

Step 6: Now that you have completed these steps, turn the machine off and wait for 5 minutes.

Step 7: Turn the machine back on and return the pen to its hiding place at the back of the machine.

[akaDaddy]

Получилось?

[copy78]

стилус(touch pen) для калибровки спрятан под крышечкой за экраном. если там нету, то вместо него можно использовать любой острый пластиковый предмет.

[Дмитрий Казахстан]

Сообщение от akaDaddy

Получилось?

да все получилось.спасибо