Продам спектрофотометер X-rite/GretegMacbeth Eye-One Pro (Москва) возможна пересылка

[madforce]

X-Rite Eye-One Pro (No Filter) REV B
цена 24 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
Scan Target chart
электропочта: madforce77@gmail.com

General Information
Date and Time: 03.11.2011 15:08:08
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 127426
Firmware version: 302
CPLD version: 301
Dark measurement count: 1038
Lamp burning time: 904.487 seconds
Spot measurement count: 87
Scan measurement count: 141

Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 03.11.2011 15:08:08
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 127426
Firmware version: 302
CPLD version: 301
Dark measurement count: 1038
Lamp burning time: 904.487 seconds
Spot measurement count: 87
Scan measurement count: 141

Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=131.227 Y=136.785 Z=124.089)
Gray measurement: Successful (X=61.083 Y=63.182 Z=56.318)
Black measurement: Successful (X=0.057 Y=0.066 Z=0.288)
Red measurement: Successful (X=53.761 Y=29.399 Z=1.337)
Green measurement: Successful (X=55.443 Y=98.521 Z=9.191)
Blue measurement: Successful (X=20.752 Y=7.363 Z=111.891)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-35.039)

Noise Measurement
Noise measurement: Pass (3.147)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=905.128 seconds, CIT=0.0138 seconds, LIT=0.0138308 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.134 a=-0.555 b=2.422)
Measurement 2: Successful (L=96.133 a=-0.578 b=2.453)
Measurement 3: Successful (L=96.128 a=-0.593 b=2.458)
Measurement 4: Successful (L=96.105 a=-0.593 b=2.472)
Measurement 5: Successful (L=96.105 a=-0.591 b=2.478)
Measurement 6: Successful (L=96.106 a=-0.599 b=2.486)
Measurement 7: Successful (L=96.103 a=-0.596 b=2.510)
Measurement 8: Successful (L=96.099 a=-0.602 b=2.509)
Measurement 9: Successful (L=96.080 a=-0.599 b=2.512)
Measurement 10: Successful (L=96.091 a=-0.605 b=2.508)
Reflectance drift test: Pass (0.031)


*** PASS ***

[madforce]

X-Rite Eye-One Pro (UV Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
Scan Target chart
электропочта: madforce77@gmail.com

General Information
Date and Time: 15.11.2011 15:36:17
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 702033
Firmware version: 506
CPLD version: 999
Dark measurement count: 47
Lamp burning time: 126.733 seconds
Spot measurement count: 11
Scan measurement count: 35

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 15.11.2011 15:36:17
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 702033
Firmware version: 506
CPLD version: 999
Dark measurement count: 47
Lamp burning time: 126.733 seconds
Spot measurement count: 11
Scan measurement count: 35

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=143.916 Y=149.752 Z=136.492)
Gray measurement: Successful (X=65.235 Y=67.255 Z=60.575)
Black measurement: Successful (X=0.172 Y=0.158 Z=0.332)
Red measurement: Successful (X=61.008 Y=33.824 Z=1.591)
Green measurement: Successful (X=58.845 Y=106.374 Z=10.495)
Blue measurement: Successful (X=22.968 Y=7.934 Z=122.895)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-200.297)

Noise Measurement
Noise measurement: Pass (2.987)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=127.374 seconds, CIT=0.0136 seconds, LIT=0.0137951 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.804 a=-0.428 b=1.903)
Measurement 2: Successful (L=95.784 a=-0.436 b=1.944)
Measurement 3: Successful (L=95.772 a=-0.430 b=1.931)
Measurement 4: Successful (L=95.751 a=-0.444 b=1.991)
Measurement 5: Successful (L=95.752 a=-0.428 b=1.969)
Measurement 6: Successful (L=95.748 a=-0.450 b=2.009)
Measurement 7: Successful (L=95.748 a=-0.468 b=2.050)
Measurement 8: Successful (L=95.761 a=-0.464 b=2.031)
Measurement 9: Successful (L=95.743 a=-0.458 b=2.031)
Measurement 10: Successful (L=95.758 a=-0.466 b=2.023)
Reflectance drift test: Pass (0.047)


*** PASS ***