Konica Minolta c7000 ошибка c4653

[Denielking]

Ребят, подскажите что за ошибка ? как исправить ? c4653

[Chernov]

Code
C-4653
Classification
Main body: Color registration board /Rr (C) abnormality
Cause
The histogram processing of C toner has terminated abnormally on the color registration board /Rr (CRB/Rr).
Measures to take when alert occurs
The main body stops immediately to turn OFF the power relay (RL1).
Estimated abnormal parts
• Printer control board
• Color registration sensor /Rr (PS9)
• Color registration board /Rr (CRB/Rr)
• Color registration shutter solenoid (SD2)
Correction
Turn OFF/ON the sub power switch (SW2) of the main body.
Note
• The message "Please call service" is displayed on the panel.
Solution
1. Output the test pattern to check whether the uneven density occurs on C toner area.
2. Check the intermediate transfer belt, and clean/replace it if there is toner image or damage.
3. Check the connector connection and the wiring between PRCB and the color registration sensor, and repair it if any abnormality.
4. Check the color registration sensor, color registration shutter solenoid, and color registration board and repair/replace it if any
abnormality.
5. Check the I/O drive of SD2 and repair/replace it if any abnormality.
6. Replace SD2.
7. Replace PS9.
8. Replace CRB/Rr.
9. Replace PRCB.
Faulty part isolation DIPSW
Control while detached

я так понимаю, что проблема с регистрацией циана. какой пробег по расходке?
зеленым выделил что попробоват ьсделать в первую очередь

[Denielking]

Сообщение от Chernov

Code
C-4653
Classification
Main body: Color registration board /Rr (C) abnormality
Cause
The histogram processing of C toner has terminated abnormally on the color registration board /Rr (CRB/Rr).
Measures to take when alert occurs
The main body stops immediately to turn OFF the power relay (RL1).
Estimated abnormal parts
• Printer control board
• Color registration sensor /Rr (PS9)
• Color registration board /Rr (CRB/Rr)
• Color registration shutter solenoid (SD2)
Correction
Turn OFF/ON the sub power switch (SW2) of the main body.
Note
• The message "Please call service" is displayed on the panel.
Solution
1. Output the test pattern to check whether the uneven density occurs on C toner area.
2. Check the intermediate transfer belt, and clean/replace it if there is toner image or damage.
3. Check the connector connection and the wiring between PRCB and the color registration sensor, and repair it if any abnormality.
4. Check the color registration sensor, color registration shutter solenoid, and color registration board and repair/replace it if any
abnormality.
5. Check the I/O drive of SD2 and repair/replace it if any abnormality.
6. Replace SD2.
7. Replace PS9.
8. Replace CRB/Rr.
9. Replace PRCB.
Faulty part isolation DIPSW
Control while detached

я так понимаю, что проблема с регистрацией циана. какой пробег по расходке?
зеленым выделил что попробоват ьсделать в первую очередь

спасибо вроде разобрался , почистил машину , потом выбило с4661, сделал color registration automatic adjustment, на cyan продавился параллон(прокладка) , из за этого он сыпался мимо , поменял - все работает )