|
|
Регистрация | Пригласить друга | Все альбомы | Файловый архив | Справка | Сообщество | Календарь | Сообщения за день | Поиск |
|
Опции темы |
22.04.2014, 20:39 | #1 |
Местный
Регистрация: 07.02.2009
Адрес: Дубна
Сообщений: 4,402
Репутация: 151
|
Про количество девелопера в проявке
Вот решил сфоткать. Это конкретно 8650. Но на остальных приблизительно столько же. |
25.04.2014, 20:09 | #21 |
Местный
Регистрация: 29.05.2009
Адрес: Москва
Сообщений: 2,604
Репутация: 247
|
Аппарат у вас какой? Я же не телепат. Стабилизацию можно сделать из сервис меню и и зменю администратора.
Ну а так копать в сторону 1. Call the Administrator Settings to the screen. 2. Touch [System Settings] → [Expert Adjustment] → [Image Stabilization] →[Initialize+Image Stabilization]. 3. Press the Start key to start Stabilizer. The Start key turns red and stays lit up red during the Stabilizer sequence. 4. Stabilizer is completed when the Start key turns blue. После этого надо сделать Gradation adjust 1. Touch [Stabilizer] and the Start key to perform image stabilization. NOTE • Before executing Gradation adjust, be sure to perform Stabilizer. 2. Call the Administrator Settings to the screen. 3. Touch [System Settings] → [Expert Adjustment] → [Gradation Adjustment]. 4. Select the appropriate mode for the gradation adjustment. 5. Press the Start key to let the machine produce a test pattern. 6. Place the test pattern produced on the original glass. 7. Place ten blank sheets of A3/11 x 17 paper on the test pattern and lower the original cover. 8. Press the Start key. (The machine will then start scanning the test pattern.) 9. Touch [OK] and repeat steps from 2 through 7 twice (a total of three times). |
25.04.2014, 20:24 | #22 |
Местный
|
MMG,
Спасибо, плюсануть не могу к сожалению. Думаю разберусь, правда немного запутанно: "7. Place ten blank sheets of A3/11 x 17 paper on the test pattern and lower the original cover. 8. Press the Start key. (The machine will then start scanning the test pattern.) 9. Touch [OK] and repeat steps from 2 through 7 twice (a total of three times)." Аппарат KM220, я писал в 18 посте, на который вы и ответили. |
25.04.2014, 23:09 | #23 |
Местный
|
|
26.04.2014, 00:11 | #24 |
Местный
|
Японская инструкция для аппарата сделанного в Китае, написанная на английском и переведенная на русский
Ну и в общем повторить эту процедуру для каждого цвета? Покупка новых чипов для проявок, если аппарат в нон стоп смысла никакого не имеют? (ну кроме эстетического в виде иконки на экране) |
|
"Форум индустрии цифровой печати" 2008-2023 Все вопросы по сотрудничеству: Электропочта: info@trade-print.ru Москва, Печатников пер. |