NOTE: Always perform the IOT Registration Side 1 adjustments before performing any other
registration adjustment, as the IOT Registration Side 1 adjustment affects the others.
1. Enter diagnostics, GP 1.
2. Select, Diagnostics Routines, then select Copier Routines, then select dC604 Registra-
tion Setup Routine.
3. Select Image Output Terminal Registration Side 1, then select All Trays, then select Print
Test Samples and follow the UI screen prompts.
NOTE: Do not select individual trays unless directed by the documentation.
a. Compare the zones A and D on the test samples, with those in Figure 2.
b. Adjust the registration, enter the number on the scale at the edge of the paper.
На распечатанном листе будут метки лист сложить пополам вдоль и поперек и по меткам которые попадут на изгиб вбиваете коректирующие значения . Следуйте инструкции на экране
For example. If the top edge of the paper aligns with the 20mm mark on zone A (20
mm indicates correct IOT registration, Figure 2) then enter 20mm. If the top edge
aligned with the 15mm mark then enter 15mm.
4. Select Image Output Terminal Registration Side 2, then select All Trays, then select Print Test Samples and follow the UI screen prompts