Цифровая печать как бизнес - форум и портал - Показать сообщение отдельно - Duplo dc-645 отказал модуль перфорации
Показать сообщение отдельно
Старый 12.06.2021, 12:38   #4
quest
Местный
 
Регистрация: 26.10.2010
Адрес: .RU
Сообщений: 6,150
Репутация: 249
По умолчанию Re: Duplo dc-645 отказал модуль перфорации

GUTTER ERROR (E14, 15)
Цитата:
This is displayed when the gutter guide does not return to the home
position within a designated time.
Remove the document in the machine and press the <STOP>
key.
1. Turn OFF the power. Then turn ON the power again.
2. Carefully open Top Cover 3. Check to see if there are any paper
in the operation range of the gutter deflector. If there is any paper
identified, carefully remove it.
3. Contact the service personnel.
https://www.manualslib.com/download/...lo-Dc-645.html

Не нашёл в документации модуль перфорации. Уверены, что он поддерживается этой машиной, а не DC-646? В тот ли слот вставляете?
https://www.manualslib.com/download/...lo-Dc-646.html

Последний раз редактировалось quest; 12.06.2021 в 12:48..
quest вне форума   Ответить с цитированием