0040 - Scan Motor Overcurrent Error 1
(Big load is put on the motor movement
instantaneously.)
0080 - Scan Motor Overcurrent Error 2
(A little load is put on the motor movement for
a long time.)
< External factors >
1. Media Jamming
2. Carriage is moved by hands.
3. Carriage runs into a thing/hand.
4. Media is stuck because it is caught by the paper pipe.
5. Media is pulled forcedly.
6. Loaded Media is too heavy.
< Machine factors >
1. The grease lubrication of the motor gear is not enough.
2. Motor is broken/Life.
3. Servo Board is broken.
4. Carriage fixation to the belt is loose.
Если коротко, то или менять мотор или почистить и смазать направляющие.