Цифровая печать как бизнес - форум и портал - Показать сообщение отдельно - Установка декодера чипов на Epson 9880
Показать сообщение отдельно
Старый 11.07.2015, 10:03   #33
Pitlord
Местный
 
Аватар для Pitlord
 
Регистрация: 07.02.2011
Адрес: Московская область
Сообщений: 4,741
Репутация: 121
По умолчанию

Китайцы ответили копированием инструкции

Hello,it maybe has problem of install.
3)-Pull up CN10 plug on the left side of printer, and insert this plug into small circuit boards white socket, then insert the small circuit boards back to CN10 socket according to original order. Please
don not install it backward.(1# contactor to 1# contactor),or it will damage printer. J1 socket on the
small circuit connect with J1 socket on the left of decoder by cable.
4)-Connect J0 terminal on the left and right side of the decoder with the red long cable. Normally the indicator keeps on.
Notice: When the monitor will show “nor original ink cartridges” when printing after using compatible ink cartridge. We suggest you take out the ink monitor software when install printer software, or set up as followings, please see the picture:
Press” Start”_ “setting up” _“Printer and Fax”,select the printer, right click, choose property_“ printing preference” _ “Apply tools”_“Speed and Course”,choose “Epson status Monitor3 forbidden”. Then there is no showings for not original ink cartridges.
Pitlord вне форума   Ответить с цитированием