Hardware error.
03800500-2F40
Turn off printer,wait, then
turn on again.
When the result of non-ejection detection is
as follows.
When non-ejection has been detected for
all nozzles of all colors
-The error code assuming a problem in the
supply system/ purge system/ main
controller PCB (electric).
Hardware error.
03130031-xxxx
Turn off printer, wait, then
turn on again.
Printhead short-circuited detected.
Prior to VH power on, it has been detected
that the printhead had been damaged due to
paper jam etc, and ink went inside the
terminal area causing near short-circuit.
2F49: L side printhead
2F50: R side printhead
2F51: LR both printhead
iPF6300 series
1. Replace the printhead
2. Replace the main controller PCB.
iPF8300 series
1. Replace the printhead
2. Replace the CR relay board
3. Check/ replace the long flexible
cable.
4. Replace the main controller PCB.